RESOURCES

 

Adjust Cortex XL 

 

Detent Pin:  Rotate clockwise to to increase detent and counterclockwise to decrease detent or remove lash.  Please note, the set screws are stiff.  Please insert the hex tool all the way and apply an axial force along with a rotational force when adjusting.  Small movements make a big difference (5 degree rotation or less).

 

Lock Pin:  Rotate clockwise to decrease lockup percentage and counterclockwise to increase lockup percentage.

 

 

 

ADJUST Mini FSD-I Lock

Rotate the black set screw pictured below using a 0.05" hex.  Clockwise will reduce lock bar travel (less percentage lockup), Counter Clockwise will increase lock bar travel (more percentage lockup).

Please Note:  Minor adjustments are needed.  5 degrees of rotation will yield large results.  Start with very minor movements and re-assemble to check desired intention.

 

 

 

ADJUST Mini FSD-I Detent

Rotate the black set screw pictured below using a 0.05" hex.  Clockwise will decrease detent strength, Counter Clockwise will increase detent strength.

Please Note:  Minor adjustments are needed.  5 degrees of rotation will yield large results.  Start with very minor movements and re-assemble to check desired intention.